seumask

We have used excel inflatables for many years and I recommend them as well made we had a Volante 290 with the inflatable keel under the...

Odd, I'm on O2 and I have not had significant issues in Chichester Harbour , based at Hayling Island sailing club often venturing...

We had a Hunter Medina and as they are not so large I would recommend you use a slightly smaller diameter stainless steel tube...

The ePropulsion eLite is great for most but not all dinghy/tender use. At 500W it's half the power of the better-known (because they've...

As ever …. It depends. Yes if you are crossing an ocean then you will be beyond the reliable period for any weather forecast - and need...

Definatley add a spray hood. I confess to enjoying making our srayhood replacement canvas 8 years ago for our Fulmar with much...

After some cracks began to appear on our similar Hunter Delta rudder I stripped it back to wood, filled all the crack with Wessex...

As I ran a Survey Co in UK till my leaving for Baltic ... the Westerly problem was seen not only on the Centaur ... I lived in Cowplain...

Hunter Horizon 26, Westerly Griffon, Westerly Konsort, Westerly Merlin all good bilge keelers in your size range that sail pretty...

According to the manual you need a 70A breaker if it's the 70A model or a 100A breaker if it's the 1000W model.

Thankyou all once again. I Can confirm that the windlass is the Lofrans Arion that Wobbley kindly posted a link for the manual in...

I'm sorry I did not respond to all the questions asked as I don't have the information to hand to answer all questions asked in the kind...

You can get a kit from Gas Boat that allows you to connect to many different bottles. They are not cheap but allow a lot of...

OK. , Thanks all more googling makes it look like a MCB. I found the previous thread that helped, and I see some of your comments on...

It is a 12V Lofrans original fit equipment from 2001